At iconnect360, we support only specific models of hardware. These models have been tested and are the only items that are compatible with iconnect360 system.
Please contact our sales team at firstname.lastname@example.org for the details and specifics for the Hardware and peripherals that work with iconnect360.
Peripherals and Hardware options that can be used with iconnect360 include:
- Thermal Receipt Printer
The recommend a POS printer just requires a USB interface and and is OPOS driver compatible.
- Cash Drawer, Flip-Top or Drawer
The recommend cash drawer is operated by the recommended receipt printer and connected using an RJ12 cable.
- Hand-held or stand Barcode Scanner / Reader
The barcode scanner / reader will allow you scan access cards, items, etc so that it is easily registered into iconnect360. We only have a couple of models that are supported and require Microsoft POS for .NET and the iconnect360 POS package for it to work.
Installations of the reader, please refer to Configure POS for iconnect360
- Enrollment Reader
This is a reader that will read a Mifare access card of key tag
- Access (Gate) Controller for turnstiles and doors (electric strike or electromagnetic)
If you have a turnstile or door that you want to control via iconnect360, you will require An access controller, We integrate with Inner Range Concept 4000 or Falco.
Refer to Set up iconnect360 access controller
- Signature Tablet
We support USB Wacom Signature tablets, for the models that we support please contact the sales team
To add profile pictures in iconnect360, we support most USB webcams.
- We only support iconnect360 on Windows 7 and Internet Explorer 11 (
- Broadband internet is required.